Speaker_WriteBuff

esp_err_t Speaker_WriteBuff(uint8_t* buff, uint32_t len, uint32_t timeout);

Plays buffer through the speaker.

Note

The speaker cannot be used at the same time as the microphone since they both share a common pin (GPIO0). Attempting to enable or use both at the same time will cause the device to hard fault.

Example:

Play a sound buffer. The audio clip is too short to be recognized and is just to serve as an example.

Microphone_Deinit(); // If the microphone was initialized, be sure to deinit it first.
Speaker_Init();
Core2ForAWS_Speaker_Enable(1);
const uint8_t sound[16] = [0x01,0x00,0xff,0xff,0x01,0x00,0xff,0xff,0x01,0x00,0xff,0xff,0xff,0xff,0xff,0xff];
Speaker_WriteBuff(&sound, 16, portMAX_DELAY);
Core2ForAWS_Speaker_Enable(0);
Speaker_Deinit();

Parameters

[out]	buff	The sound buffer to play.
[in]	len	Length of the buffer.
[in]	timeout	UNUSED.

Returns

esp_err_t. 0 or ESP_OK if successful.